Skip to main content

Testing Your Connection

Torus Echo -the Connectivity Test Service

Once you have configured your VPN connection, you can verify it is working correctly by connecting to the Torus Echo service. This is a dedicated test endpoint that is always available on the Torus network.

Test Endpoint

ServiceAddressDescription
HTTPhttp://10.254.16.50/Web page confirming connectivity
Telnet Echotelnet 10.254.16.50Echo service - characters are reflected back

Testing via Web Browser

The easiest way to test your connection:

  1. Connect to the Torus VPN using your WireGuard configuration
  2. Open a web browser
  3. Navigate to http://10.254.16.50/
  4. If you see the "Torus Echo - Connection Successful" page, your VPN is working!

Testing via Command Line

Using curl (HTTP)

curl http://10.254.16.50/

Expected output: HTML content with "Connection Successful" message

Using ping

ping 10.254.16.50

Expected output: Replies from 10.254.16.50 with latency typically 100-150ms (varies by location)

Using telnet (Echo Service)

telnet 10.254.16.50

You will see a welcome banner. Any text you type will be echoed back to you. To exit:

  • Press Ctrl+] then type quit
  • Or simply close the terminal

Troubleshooting

Cannot reach 10.254.16.50

  • Check VPN is connected - Verify WireGuard shows "Latest handshake" within the last 2few minutesminutes. Even if the client shows connected...it could be lying to you :)
  • Check your AllowedIPs - Must include 10.254.16.0/24 (Note: this subnet is the Torus overlay).
  • Firewall rules - Ensure your local firewallgateway device allows traffic to 10.254.16.0/24

High latency

  • The echo server is located in DubaiDubai, UAE - expect 100-200ms250ms from Europe/US
  • If latency exceeds 300ms,500ms, check your internet connection qualityquality. Some ping tools time out at 1000ms (1 second), so if you get 'no reply from' or' unreachable', then try to increase your timeout.

Still not working?

Contact support via the Support page or(Forum postwill inbe thecoming Forum.2026)

Technical Details

The Torus Echo service runs on an isolated network segment behind a Mikrotik Cloud Hosted Router (CHR). It provides:

  • HTTP (port 80): nginx web server with connectivity confirmation page
  • Telnet (port 23): Secure echo daemon - characters are reflected back,reflected, no shell access

IP Address 10.254.16.50 is permanently reserved for this service and will never be allocated to users.

Back to top